P110 Casing Pipe,Q125 Casing pipe,API 5CT ERW Casing pipe for OCTG and Linepipe

3 125

CASING OD:Casing: OD 4 1/2"- 20" (114.3mm-508mm) or 1.660″ – 30″
CASING WT: 0. 205"- 0.635"
TUBING PIPE: OD 2 3/8" - 4 1/2" (60.3mm-114.30mm)
Length: LR1(4.88mtr-7.62m), LR1(7.62mtr-10.36m), LR1(10.36m)

API 5CT P110 casing pipe - API grade for general use in deep wells. This grade is not generally considered suitable for sour condensate wells. typically found in serious wells; this quality is not appropriate for most bad condensate wells

API 5CT P110 casing pipe

 

P110 Casing Pipe Chemical Composition

  C Mn Mo Cr Ni Cu Ti P S Si V Al
Min - - - - - - - - - - - -
Max - - - - - - - 0.030 0.030 - - -
 
API 5CT Q125 Casing pipe- API grade for deep effectively service, not usually for use in sour condensate wells. API class for deeply effectively service, generally not for usage in undesirable condensate wells; quadrant hardness testing is essential (no specific hardness restrictions apart from the variation amongst numbers); impact tests needed for every single heating and whole lot; commonly EMI and UT NDT examinations are essential`
 
API 5CT Q125 Casing pipe

Q125 Casing pipe Chemical Composition

  C Mn Mo Cr Ni Cu Ti P S Si V Al
Min - - - - - - - - - - - -
Max 0.350 1.350 0.850 1.500 0.990 - - 0.020 0.010 - - -

 NF A49 207 TSZ2CN 18-10 TUZ2CN810 TSZ6CNNb18-12 TUZ6CNNb18-12 Seamless and Welded Steel Pipe

NF A49 207 TSZ2CN 18-10 TUZ2CN810 TSZ6CNNb18-12 TUZ6CNNb18-12 Seamless and Welded Steel Pipe

 

.

Related post

3 Comments

  1. K55 Petroleum Casing Pipe
    K55 Petroleum Casing Pipe 1425895010 -  Reply / Edit

    API 5CT K55 and J55 oilfield petroleum casing pipe is quite similar to J55, there is no considerable distinction within the chemical composition and yield strength, howeverhigher than J55 steel pipe, K55 or J55 pipe are 654MPa and 519MPa co.

  1. Large Diameter Hot Rolled Steel Pipe
    Large Diameter Hot Rolled Steel Pipe 1337585967 -  Reply / Edit

    Large Diameter Hot Rolled Steel Pipe Size: 1/2"--36" Sch 40, sch 80, xs, xxs Length: 1----12m Special pipe: API pipe Manufacture technique: Hot rolled Model number: 20# or others Grade: Carbon steel, stainless steel Usage: For.

  1. ASTM A315 Square Hollow Section
    ASTM A315 Square Hollow Section 1336964588 -  Reply / Edit

    ASTM A315 Square Hollow Section 1 Anti-corrosion and high-temperature resistant with black painting 2 All the production process are made under the ISO9001: 2008 strictly 3 Payment term: L/C, T/T, money gram. 4 Trade term: CIF, CFR, F.

  1. DIN St35.8 Boiler tube
    DIN St35.8 Boiler tube 1333806778 -  Reply / Edit

    DIN St35.8 Boiler tube,KEY WORDS: DIN ST35.8 boiler tube, DIN ST35.8 boiler pipe, DIN17175 ST35.8 boiler tube, DIN17175 ST35.8 boiler pipe, DIN ST45.8 boiler steel tube.

Latest Comments

  • Welded (ERW, LSAW, SSAW) steel line pipe grade feature
    Welded (ERW, LSAW, SSAW) steel line pipe grade feature

    Specification Octal supply API 5L welded ( ERW, EFW , LSAW, SSAW ) steel line pipe in Gr B, X42, X46, X52, X56, X60, X65 PSL1, PSL2 and for sour service (NACE pipe). Line pipe brief introduction API 5L steel line pipe is for oil and gas ind.

  • 15CrMoG Alloy steel tube Introduction, characteristics, chemical composition, presentation method
    15CrMoG Alloy steel tube Introduction, characteristics, chemical composition, presentation method

    15CrMoG Alloy steel tube Introduction, characteristics, chemical composition, presentation method 15CrMoG Alloy steel pipe is a seamless steel tube, its performance is much higher than the general seamless steel pipe, because the inside of.

Get in touch

Our company covers an area of 80, 000 m2 with a total assets of 90 million Yuan. There are 360 staff members including 80 technicians in our company. .

We also establish an effective complete quality control system. In 2003, our company obtained the certificate of ISO9001 Quality System Authentification!