Breaking News:

16MN low temperature steel pipe installation requirements

3 125

 16MN low temperature steel pipe installation requirements
 REVIEW: 16MN the use of low-temperature steel pipe installed in claim 1, low-temperature tube models, specifications and pipeline configuration check before installation must meet the design requirements. 2 should be taken that the direction of the medium flow direction of the inner sleeve, with the inner sleeve of the compensator ...
16MN low temperature steel pipe installation requirements
1, the low-temperature pipe installation should be preceded by checking the models, specifications and piping configuration must meet the design requirements.
2, with the inner sleeve of the compensator should be noted so that the inner sleeve in the direction consistent with the direction of medium flow, the rotational plane of the hinge of the hinge-type compensator should be consistent with the displacement plane.
3, the need for the "cold and tight compensator the auxiliary member predeformation should be removed only after the installation of pipelines.
4, non-cryogenic tube deformation method to adjust the mounting of the pipe tolerance, so as not to affect the normal function of the compensator, to reducing action life and to increase the tube system, equipment, the load of the support member.
5, cryogenic pipe during the installation process, the welding slag is not allowed to fly into the wave-shell surface, does not allow wave shell by the other mechanical damage.
      1200 ℃ low temperature tube furnace is designed for low-temperature CVD process, such as the development of carbon nanotubes and other materials sintered. Furnace using quality ceramic fiber products, insulation, thermal insulation, Sweden Cornell imported resistance wire heating, high-quality gas refining quartz tube furnace, the system can be pre-vacuum. The import procedures warming intelligent temperature control instrument control, inside and outside the three-layer insulation products, fire protection, thermal insulation. Uniform temperature control and stability, the temperature range of the temperature perturbation, heating speed, energy saving, the use of high temperature, long life, and is an ideal research equipment.

Related post


  1. Special steel pipe
    Special steel pipe 1331087358 -  Reply / Edit

    Special steel pipe,We can produce the pipes as bellow: Specification: ASTM A106.ASTM A53.ASTMA179.ASTMA195.DIN.JIS.BS Pipe Size: from 1/4" to 28" OD from 13.7 mm to 711.2 mm Fitting Size:1/2"- 48".

  1. Insulated pipeline
    Insulated pipeline 1331088420 -  Reply / Edit

    Insulated pipeline,hdpe tube, polyurethane foam insulation SY/standard: SY/T114-2000,SY/T115-2001 2, oil and gas with three layers polyethylene (3PE anticorrosion, 2) steel tube corrosion 2PE (PE), Standard: SY/T0413-2002, DIN30670..

  1. Galvanized steel pipe
    Galvanized steel pipe 1331096044 -  Reply / Edit

    Galvanized steel pipe,1)Shape:Round,Square,Rectangular 2)ASTM A53,BS1387-85 3)Steel structural,furniturer,fencing,fluid pipe.

  1. flange,steel flange,carbon steel flange
    flange,steel flange,carbon steel flange 1331088937 -  Reply / Edit

    flange Types:Welding Neck Flanges, Slip on Flanges, Threaded Flanges, Socket Welding Flanges, Blind Flanges, Orifice Flanges, Lap Joint Flanges, Ring Joint Flanges, Long Welding Neck Flanges, Figure 8 Blanks.

  1. Seamless Carbon Steel Pipe
    Seamless Carbon Steel Pipe 1334922285 -  Reply / Edit

    Seamless Carbon Steel Pipe,ASTM A106/A53 GR.B Carbon steel pipe ,10#,20#,45#,16Mn, ASTM A106 Gr.B, ASTM A53 Gr.B, St 37, St 42, St 52, Q 235, Q 195, Q345, 27SiMn.

  1. Welded Pipe,Welded Steel Pipe
    Welded Pipe,Welded Steel Pipe 1331086034 -  Reply / Edit

    Welded Pipe,supply Welded Steel Pipe,Standard:JIS AISI ASTM GB DIN EN,Large Diameter Welded Pipe,Thick Wall Steel pipe, ERW/LSAW welded steel pipes and tubes,length is less than 14m, thickness is less than 2.5 inch etc..

Latest Comments

  • Specification type, production technology and application ran
    Specification type, production technology and application ran

    [keywords: hot-rolled steel pipe release date: 2017-11-11 10:33:25] The standard of hot-rolled steel pipe: This product is based on API Spec 5L Oil Natural gas scale, API Spec 5CT oil casing specification, gb/t8163-1999 for conveying fluid.

  • A53 United States standard seamless steel pipe corresponding
    A53 United States standard seamless steel pipe corresponding

    20# seamless steel pipe.

Get in touch

Our company covers an area of 80, 000 m2 with a total assets of 90 million Yuan. There are 360 staff members including 80 technicians in our company. .

We also establish an effective complete quality control system. In 2003, our company obtained the certificate of ISO9001 Quality System Authentification!